Interview questions by role

Electrical engineer interview questions

Electrical engineer interviews test your fundamentals, such as circuits, three-phase power, machines, protection and controls, how you approach design and fault investigation, and whether safety shapes your decisions. Expect a walkthrough of a project you designed or commissioned, questions on sizing and selecting equipment, protection coordination, a fault you investigated, the standards you work to, and how you work with installers, other disciplines and clients.

The difference from an electrician interview is justification: electricians are asked how they install and test safely; electrical engineers are asked why the design is right and how they calculated it.

Mock Interview Copilot practice room: an AI interviewer asks a follow-up question while the candidate's spoken answer and pace appear in the transcript
Practising answers out loud in Mock Interview Copilot: the interviewer follows up when an answer is vague, and your pace and pauses are measured.

How the interview usually runs

Electrical engineering covers very different jobs: power systems and utilities, building services, industrial controls and automation, electronics, renewables and grid connections, and rail. Interviews are usually with a senior engineer and a manager, and many include a technical section: whiteboard questions on power factor, transformers or motor starting, a short calculation, or a design scenario. Controls roles may ask you to talk through logic you wrote.

In the UK, you may be asked about chartership through a body such as the IET and, for building installations, BS 7671. In the US, expect questions about the FE exam, a PE license, the National Electrical Code and relevant IEEE standards. Industrial and power roles often ask about permit-to-work systems, lockout, fault levels and arc flash. Graduates are judged on fundamentals and projects; experienced engineers on designs they owned and the problems they solved on site.

Common questions and what the interviewer is checking

  1. Talk me through an electrical system you designed or commissioned.

    What they are checking: The requirements, the key calculations and equipment choices, how the design was checked, what happened at commissioning, and your personal part in it.

  2. How would you size a cable for a new circuit?

    What they are checking: Design current, protective device rating, installation method, grouping and ambient temperature, voltage drop and fault conditions, checked against the standard you work to rather than a rule of thumb.

  3. What is power factor, and why does it matter?

    What they are checking: A clear explanation of real and reactive power, the effect of a poor power factor on current, losses and capacity, and how it can be corrected.

  4. How do you make sure protection devices discriminate properly?

    What they are checking: Understanding of fault levels, time-current curves and grading so the device nearest the fault operates first, and of checking this in a study rather than assuming.

  5. A piece of equipment keeps tripping during commissioning. How do you investigate?

    What they are checking: Working safely, gathering data from relays, logs and operators, forming hypotheses, testing one thing at a time, and fixing the cause rather than repeatedly resetting.

  6. How does safety shape your designs?

    What they are checking: Designing for safe isolation and maintenance, labelling, fault level and arc flash awareness, permits, and staying within your competence on live systems.

  7. How do you work with electricians and installers on site?

    What they are checking: Respect for installation knowledge, clear drawings and specifications, answering site queries quickly, and taking buildability feedback into the next design.

  8. Tell me about a time you explained a technical trade-off to a client or another discipline.

    What they are checking: Translating options into cost, reliability, downtime and risk, and helping the client make an informed decision.

  9. For controls roles: how would you approach a system that fails intermittently?

    What they are checking: Checking signals, wiring, earthing and noise, as well as logic and timing, using logs or trending, and managing changes to live code carefully.

  10. Which standards and software have you used, and for what?

    What they are checking: Real use with examples, and an understanding of what the software assumes and when to check its results by hand.

How to structure a strong answer

For technical questions, explain your method in order and say why each step matters. For project and fault questions, use STAR with the engineering in the middle: the symptom, the data you gathered, the hypotheses you ruled out, the fix and how you verified it.

Example answer

A piece of equipment keeps tripping during commissioning. How do you investigate?

On a pumping station project, a new motor feeder tripped every time the pump started, which was holding up handover. The contractor wanted to raise the protection setting.

I asked for the trip records from the protection relay before anyone changed anything. They showed the trip was on the instantaneous element, right at start, rather than overload during running. I checked the motor data sheet and our design: the motor was started direct on line, and its starting current was higher than the setting left in the relay, which turned out to be a default that had not been updated from the protection study.

I took this to my senior engineer, and we confirmed the correct setting from the coordination study, checking it still graded with the upstream device. The setting was changed under the site permit, and we ran the pump through repeated starts with no trips. We added a step to our commissioning checklist to confirm relay settings against the study before first energisation, which caught the same issue on two other feeders.

Mistakes to avoid

Frequently asked questions

What questions are asked in an electrical engineering interview?

Expect a project walkthrough, cable and equipment sizing, power factor, protection and discrimination, a commissioning or fault investigation, safety in design, working with installers, standards and software, and competency questions about teamwork and deadlines.

What is the difference between an electrical engineer and an electrician interview?

Electrician interviews focus on installing, testing, safe isolation and customer jobs. Electrical engineer interviews focus on design decisions, calculations, protection, specifications and responsibility for signing off a design, although site awareness still matters.

How should I prepare for a technical electrical engineering interview?

Revise the fundamentals for the role, such as three-phase power, transformers, motors, protection or control logic, and be ready to explain your own projects in depth, including the assumptions you made and how they were checked.

What can graduates talk about without industry experience?

Final year projects, placements, lab work, competitions and personal builds. Explain what you designed, how you tested it and what you would change, just as you would for an industry project.