Interview questions by role

Welder interview questions

Welder interviews check four things: that you can lay sound welds in the processes and positions the job needs, that you can read drawings and weld symbols, that you work safely around heat, fumes and sparks, and that you take quality seriously. Expect to be asked which processes you have used, such as MIG, TIG, stick or flux-cored, on which materials, what a symbol on a drawing means, what causes a common defect, how you control distortion, how you check your own work, and about a weld that failed inspection.

Many employers also give a practical weld test.

Mock Interview Copilot practice room: an AI interviewer asks a follow-up question while the candidate's spoken answer and pace appear in the transcript
Practising answers out loud in Mock Interview Copilot: the interviewer follows up when an answer is vague, and your pace and pauses are measured.

How the interview usually runs

Interviews are usually with a shop supervisor, foreman or welding inspector, and are short and practical. A test is common: you may weld a coupon to a procedure, which is then visually inspected or bend tested. The work varies a lot: structural steel, pipework, pressure vessels, shipbuilding, manufacturing lines and maintenance all ask different things.

Employers will ask exactly what you are qualified to. Welder qualifications are usually tied to a process, material, thickness range and position, and are tested against a code or standard, such as AWS codes in the US or ISO 9606 in the UK and Europe. Be precise about what you hold and whether it is current, and say what you are working towards. Apprentices and new welders are asked more about their college course, attitude, reliability and willingness to learn.

Common questions and what the interviewer is checking

  1. Which processes have you used, on which materials and in which positions?

    What they are checking: Honest, specific experience, such as MIG on mild steel in the flat and horizontal positions, or TIG on stainless pipe, rather than claiming everything.

  2. What does this weld symbol mean?

    What they are checking: That you can read arrow side and other side, fillet and butt or groove welds, size, length, weld all round and field welds, and ask when a drawing is unclear.

  3. Your welds are showing porosity. What could cause it and how would you fix it?

    What they are checking: Systematic thinking: gas coverage and flow, draughts, contamination such as oil, paint or rust, damp electrodes or wire, and checking one cause at a time.

  4. How do you prepare a joint before welding?

    What they are checking: Cleaning, edge preparation, fit-up and gap, tacking, and preheat when the procedure calls for it.

  5. How do you control distortion?

    What they are checking: Tack sequence, balanced or back-step welding, clamping and fixtures, and keeping heat input under control.

  6. What is a welding procedure specification, and why does it matter?

    What they are checking: That a WPS sets the parameters for a qualified weld, and that you follow it and do not change settings outside it without approval.

  7. What safety precautions do you take?

    What they are checking: PPE, fume extraction, screens to protect others from arc flash, gas cylinder storage and handling, hot work permits and fire watch, and extra care in confined spaces.

  8. How do you check your own work before passing it on?

    What they are checking: Visual inspection for undercut, cracks, spatter and profile, checking dimensions against the drawing, cleaning, and marking or recording the work if traceability is required.

  9. Tell me about a weld that failed inspection or a test.

    What they are checking: Honesty about what went wrong, the cause you found, how it was repaired properly and what you do differently now.

  10. Do you know the inspection methods used on your welds?

    What they are checking: Awareness of visual inspection and of methods such as dye penetrant, magnetic particle, ultrasonic or radiographic testing, and what kind of defects each finds.

How to structure a strong answer

For technical questions, answer like you are explaining it to a new starter in the shop: the cause, what you check first, and what you change. For experience questions, use a short STAR story with a real job, and be honest about defects.

Example answer

Tell me about a weld that failed inspection.

At my last shop I was MIG welding fillet welds on structural brackets, a batch of fourteen. The inspector rejected the first three for undercut along the top toe of the weld.

I went back over what had changed. We had switched to a larger wire that week, and I had turned the voltage and wire speed up to match without running a test piece, so I was travelling too fast with too much heat. I told my supervisor what I thought the cause was, ran some test welds on scrap of the same thickness, and settled on settings inside the procedure that gave a good profile.

The three rejected brackets were ground out where the inspector marked them and re-welded with the supervisor watching the first one. All fourteen passed when they were re-inspected. Now, whenever I change wire, gas or settings, I run a test piece first, even when we are busy, because a rejected batch costs much more time than five minutes on scrap.

Mistakes to avoid

Frequently asked questions

What questions are asked in a welder interview?

Expect questions on the processes, materials and positions you have welded, weld symbols, causes of defects such as porosity and undercut, distortion, procedures, safety, checking your own work, inspection methods and a weld that failed.

Will I have to do a weld test at the interview?

Often, yes. Many employers ask you to weld a test piece to a procedure, which is then inspected or bend tested. Ask beforehand which process, material and position the test uses, and bring your own PPE if they ask you to.

How do I answer welding questions with little experience?

Be honest about what you have done at college, in an apprenticeship or on your own projects, explain how you set up and check a weld, and show you know the safety basics. Employers hiring new welders look for reliability and willingness to learn.

What is the difference between MIG, TIG and stick welding?

MIG feeds a wire electrode with shielding gas and is quick for production work. TIG uses a non-consumable tungsten electrode and separate filler, giving precise, clean welds on thinner material and stainless. Stick uses a flux-coated electrode, works outdoors and on site, and needs slag removing.